Anesthetic Management of a Patient with Madelung's Disease Presenting with a Giant Cervical Lipoma: A Case Report.

Madelung's disease is characterized by the presence of multiple symmetric and nonencapsulated facial, neck, and upper trunk lipomas. Depending on the location and size of lipomas, there may be concerns for difficult airway management and cardiovascular collapse. We present the anesthetic management case of a patient with cervical and mediastinal lipomas who underwent elective cervical lipoma resection.

Surface scanned 3D designed customized chinstrap for the treatment of intraoral dehiscence in polytraumatized patient. Technical note.

The advent of 3D surgical technology has revolutionized personalized medicine, enabling the development of tailored solutions for individual patients. This technical note presents the application of 3D technology in designing a customized chin guard using flexible 3D resin. The process involves surface scanning the lower facial region of a polytraumatized patient with a structured-light surface 3D scanner, generating a detailed point cloud. The acquired data undergoes meticulous processing within an specific professional software, including erasing unwanted portions, aligning frames, and mesh consolidation. Subsequently, the mesh is exported as an STL file and further refined using a 3D mesh management software. A customized chin support is designed for the specific patient's needs, exported in STL format, and 3D printed using a stereolithography (SLA) printer with Flexible 80A resin. Post-printing procedures involve washing and curing to ensure biocompatibility and optimal mechanical characteristics. The resultant customized chin guard, attached to elastic support straps, offers a precise fit to the patient's anatomy, enhancing comfort and allowing for extended wear. This innovative approach addresses the challenge of surgical intraoral wound dehiscence in a polytraumatized patient, showcasing the potential of 3D technology in personalized medical solutions for complex cases. Key words:Surface scanner, 3D surgery, customized surgery, chinstrap.

Virtual Surgical Planning for Temporomandibular Joint Reconstruction with Stock TMJ Prostheses: Pilot Study.

The temporomandibular joint (TMJ) is one of the most complex joints in the human anatomy. In advanced degenerative stages, conservative or minimally invasive surgical therapies have failed to restore joint function, and joint replacement with prostheses has been required. Stock prostheses, compared to custom-made prostheses, are much less expensive and require less pre-operative preparation time. Four patients followed for years for temporomandibular dysfunction and previously operated on by arthroscopy or open joint surgery that have been reconstructed with stock TMJ prostheses (STMJP) through virtual surgical planning (VSP) and an STL model with surgical and positioning guides were included. The median follow-up was 15 months; the median number of previous TMJ surgeries was 2. The mean preoperative MIO was 24.6 mm and at longest follow-up was 36.4 mm. The median preoperative TMJ pain score was 8, and the median postoperative TMJ pain was 3. All patients have improved their mandibular function with a clear improvement of their initial situation. In conclusion, we believe that stock TMJ prostheses with virtual surgical planning and surgical guides are a good alternative for TMJ reconstruction at the present time. Nonetheless, prospective and randomized trials are required with long-term follow up to assess their performance and safety.

3D designed in-house positioning and cutting guide system for genioplasty surgery. Technical note and case report.

Advances in 3D printing technology have the potential to significantly improve the workflow of maxillofacial surgical planning. In-house fabricated custom positioning and cutting guides allow for intraoperative reproduction of pre-planned osteotomy cuts, which can result in greater surgical accuracy and patient safety while maintaining an acceptable cost-effectiveness ratio. The design and creation of the customized surgical guides is performed in our hospital fab lab, which allows time savings, from an average of 10 days to just 24 hours, and a cost reduction of more than 90%. The process begins with the import of the pre-surgical facial CT scan into 3D software that allows to perform the surgical cuts virtually and the manipulation of the segments. Once the virtual planning of the surgery has been performed, the next step is the creation of the cutting and positioning guides. The final step is the printing of the guides in surgical resin and their sterilization. In addition, post-surgical models can be 3D printed to pre-mold the plates on them, which saves surgical time. The mentoplasty surgery is a simple example of how 3D surgery can be applied to maxillofacial surgery in an efficient way obtaining all the advantages of customized surgery with a limited investment in time and resources. Key words:3Dsurgery, customized, personalized medicine, genioplasty, surgical guides, in house.

Depth of Invasion: Influence of the Latest TNM Classification on the Prognosis of Clinical Early Stages of Oral Tongue Squamous Cell Carcinoma and Its Association with Other Histological Risk Factors.

BACKGROUND: The American Joint Committee on Cancer (AJCC), in its 8th edition, introduces modifications to the previous TNM classification, incorporating tumour depth of invasion (DOI). The aim of this research is to analyse the prognosis (in terms of disease-free survival and overall survival) of clinical early stage (I and II) squamous cell carcinomas of the oral tongue according to the DOI levels established by the AJCC in its latest TNM classification to assess changes to the T category and global staging system and to evaluate the association between DOI and other histological risk factors. METHODS: A retrospective longitudinal observational study of a series of cases was designed. All patients were treated with upfront surgery at our institution between 2010 and 2019. The variables of interest were defined and classified into four groups: demographic, clinical, histological and evolutive control. Univariate and multivariate analyses were carried out and survival functions were calculated using the Kaplan-Meier method. Statistical significance was established for p values below 0.05. RESULTS: Sixty-one patients were included. The average follow-up time was 47.42 months. Fifteen patients presented a loco-regional relapse (24.59%) and five developed distant disease (8.19%). Twelve patients died (19.67%). Statistically significant differences were observed, with respect to disease-free survival (p = 0.043), but not with respect to overall survival (p = 0.139). A total of 49.1% of the sample upstaged their T category and 29.5% underwent modifications of their global stage. The analysis of the relationship between DOI with other histological variables showed a significant association with the presence of pathological cervical nodes (p = 0.012), perineural invasion (p = 0.004) and tumour differentiation grade (p = 0.034). Multivariate analysis showed association between depth of invasion and perineural invasion. CONCLUSIONS: Depth of invasion is a histological risk factor in early clinical stages of oral tongue squamous cell carcinoma. Depth of invasion impacts negatively on patient prognosis, is capable per se of modifying the T category and the global tumour staging, and is associated with the presence of cervical metastatic disease, perineural invasion and tumoural differentiation grade.

HPV infection in oral cancer, our experience: prevalence, clinical implications, and current vaccination program in Spain.

Background: Oral cancer is the 11th most common type of cancer in the world, with established major risk factors as tobacco and alcohol, and recently included high-risk human papillomavirus types 16 and 18. HPV types 16 and 18 are the etiologic agents of cervical cancers and a proportion of oropharyngeal cancers. However, the picture of HPV and the clinical implications of oral cancers are not clear with most reports combining oral cancer data with head and neck cancers. It has been confirmed as a favorable prognostic factor in oropharyngeal cancer. However, the prognostic value of HPV in oral squamous cell carcinoma is still unclear. Material and Methods: The main objective of this article is to present the evidence encountered following a bibliographical review of recent publications specifically related to oral cancer and its differences from oropharyngeal cancer. The secondary goals are to present the findings of a five-year retrospective observational study of the prevalence of HPV infection in oral cancer patients treated by the Oral and Maxillofacial Surgery Department at La Paz University Hospital (Madrid, Spain), and finally, we to evaluate and compare our country's HPV prevention program in comparison to other European countries. Results: According to the review of the literature, HPV positive oral squamous cell carcinoma is associated with significantly decreased overall survival and distant control. Bibliographic review suggest HPV infection can be used as a negative prognostic factor in oral squamous cell carcinoma. Conclusions: As regards diagnostic testing for HPV, it should be extended to as many cases of oral cavity squamous cell carcinoma as possible, especially in those with risk factors. The current vaccination program in Spain does not have adequate coverage and is significantly under the level of other European Union countries; it should be expanded and catch-up strategies should be included. Key words:HPV, OSSC, Papillomavirus, oral carcinoma, prevention.

Use of surgical bone cement to increase the projection of the nasomaxillary buttress in a case of orthognathic surgery. Technical note.

The soft tissue outcome of the projection at the level of the nasomaxillary buttress is difficult to manage in cases of severe hypoprojection, being orthognathic surgery resolutive at the occlusal level but sometimes insufficient at the level of esthetic outcome. The literature describes the use of alloplastic prostheses and autologous bone grafts, but there are few documented cases of the use of premolded surgical cement for this purpose. The main advantage of the use of bone cement over the alternatives described is its ability to be premolded for customization, low cost, easy availability, speed of preparation and minimal comorbidity. This technical note describes the surgical steps and outcome of the use of surgical bone cement for projection augmentation at this level, including notes on preparation, premolding and fixation. Key words:Orthognathic surgery, maxillary surgery, surgical bone cement, nasomaxillary buttress.

A Quantitative and Qualitative Clinical Validation of Soft Tissue Simulation for Orthognathic Surgery Planning.

The purpose of this study was to perform a quantitative and qualitative validation of a soft tissue simulation pipeline for orthognathic surgery planning, necessary for clinical use. Simulation results were retrospectively obtained in 10 patients who underwent orthognathic surgery. Quantitatively, error was measured at 9 anatomical landmarks for each patient and different types of comparative analysis were performed considering two mesh resolutions, clinically accepted error, simulation time and error measured by means of percentage of the whole surface. Qualitatively, evaluation and binary questions were asked to two surgeons, both before and after seeing the actual surgical outcome, and their answers were compared. Finally, the quantitative and qualitative results were compared to check if these two types of validation are correlated. The quantitative results were accurate, with greater errors corresponding to gonions and lower lip. Qualitatively, surgeons answered similarly mostly and their evaluations improved when seeing the actual outcome of the surgery. The quantitative validation was not correlated to the qualitative validation. In this study, quantitative and qualitative validations were performed and compared, and the need to carry out both types of analysis in validation studies of soft tissue simulation software for orthognathic surgery planning was proved.

Virtual Surgical Planning and Customized Subperiosteal Titanium Maxillary Implant (CSTMI) for Three Dimensional Reconstruction and Dental Implants of Maxillary Defects after Oncological Resection: Case Series.

Maxillectomies cause malocclusion, masticatory disorders, swallowing disorders and poor nasolabial projection, with consequent esthetic and functional sequelae. Reconstruction can be achieved with conventional approaches, such as closure of the maxillary defect by microvascular free flap surgery or prosthetic obturation. Four patients with segmental maxillary defects that had been reconstructed with customized subperiosteal titanium maxillary implants (CSTMI) through virtual surgical planning (VSP), STL models and CAD/CAM titanium mesh were included. The smallest maxillary defect was 4.1 cm and the largest defect was 9.6 cm, with an average of 7.1 cm. The reconstructed maxillary vertical dimension ranged from 9.3 mm to 17.4 mm, with a mean of 13.17 mm. The transverse dimension of the maxilla at the crestal level was attempted to be reconstructed based on the pre-excision CT scan, and these measurements ranged from 6.5 mm in the premaxilla area to 14.6 mm at the posterior level. All patients were rehabilitated with a fixed prosthesis on subperiosteal implants with good esthetic and functional results. In conclusion, we believe that customized subperiosteal titanium maxillary implants (CSTMI) are a safe alternative for maxillary defects reconstruction, allowing for simultaneous dental rehabilitation while restoring midface projection. Nonetheless, prospective and randomized trials are required with long-term follow-up, to assess its long-term performance and safety.

Intraosseous Venous Malformation of the Zygomatic Bone: Comparison between Virtual Surgical Planning and Standard Surgery with Review of the Literature.

Intraosseous venous malformations affecting the zygomatic bone are infrequent. Primary reconstruction is usually accomplished with calvarial grafts, although the use of virtual surgical planning, cutting guides and patient-specific implants (PSI) have had a major development in recent years. A retrospective study was designed and implemented in patients diagnosed with intraosseous venous malformation during 2006-2021, and a review of the scientific literature was also performed to clarify diagnostic terms. Eight patients were treated, differentiating two groups according to the technique: four patients were treated through standard surgery with resection and primary reconstruction of the defect with calvarial graft, and four patients underwent resection and primary reconstruction through virtual surgical planning (VSP), cutting guides, STL models developed with CAD-CAM technology and PSI (titanium or Polyether-ether-ketone). In the group treated with standard surgery, 75% of the patients developed sequelae or morbidity associated with this technique. The operation time ranged from 175 min to 210 min (average 188.7 min), the length of hospital ranged from 4 days to 6 days (average 4.75 days) and the postoperative CT scan showed a defect surface coverage of 79.75%. The aesthetic results were "excellent" in 25% of the patients, "good" in 50% and "poor" in 25%. In the VSP group, 25% presented sequelae associated with surgical treatment. The operation time ranged from 99 min to 143 min (average 121 min), the length of hospital stay ranged from 1 to 2 days (average of 1.75 days) and 75% of the patients reported "excellent" results. Postoperative CT scan showed 100% coverage of the defect surface in the VSP group. The multi-stage implementation of virtual surgical planning with cutting guides, STL models and patient-specific implants increases the reconstructive accuracy in the treatment of patients diagnosed with intraosseous venous malformation of the zygomatic bone, reducing sequelae, operation time and average hospital stay, providing a better cover of the defect, and improving the precision of the reconstruction and the aesthetic results compared to standard technique.

Clinical and Surgical Outcomes in Extensive Scalp Reconstruction after Oncologic Resection: A Comparison of Anterolateral Thigh, Latissimus Dorsi and Omental Free Flaps.

Microsurgical scalp reconstruction is indicated in patients with large scalp defects. The aim of this study was to compare the outcomes of scalp reconstruction in oncologic patients reconstructed with latissimus dorsi (LD), anterolateral thigh (ALT), and omental (OM) free flaps. Thirty oncologic patients underwent scalp reconstruction with LD (10), ALT (11), and OM (9) flaps. The length of the vascular pedicle, the operation time, the possibility of a two-team approach, the length of hospital stays, the complications, and the aesthetic results were evaluated. The OM flap was the flap with the shortest vascular pedicle length with a mean of 6.26 ± 0.16 cm, compared to the LD flap, which was 12.34 ± 0.55 cm and the ALT flap with 13.20 ± 0.26 cm (p < 0.05). The average time of surgery was 6.6 ± 0.14 h in patients reconstructed with OM, compared to the LD flap, which was 8.91 ± 0.32 h and the ALT flap with 7.53 ± 0.22 h (p < 0.05). A two-team approach was performed in all patients for OM flaps and ALT flaps, but only in two patients reconstructed with the LD flap (p < 0.001). In patients reconstructed with the OM flap, a very satisfactory or satisfactory result was reported in seven patients (77.8%). Eight patients reported a very unsatisfactory or unsatisfactory result with LD flap (80%) and 10 patients with ALT flap (90.9%) (p = 0.002). The mean hospital stay after surgery was not statistically significant (p > 0.05). As for complications, two patients reconstructed with OM flap, five LT flaps, and two ALT flaps developed complications, not statistically significant (p = 0.235). Omental flap, latissimus dorsi flap, and anterolateral thigh flap fulfill most of the characteristics for complex scalp reconstruction. The decision on which flap to use should be based on clinical aspects of the patients taking into account that the three flaps show similar rates of complications and length of hospital stay. Regarding the aesthetic outcome, OM flap or LD flap should be considered for reconstruction of extensive scalp defects.

Temporomandibular disorders: improving outcomes using a multidisciplinary approach.

Patients with temporomandibular disorders (TMD) can become very complex. This article aims to highlight the importance of the multimodal and multidisciplinary approach in this type of patients to improve clinical outcomes. At present we have innumerable techniques and tools to approach this type of patients from a biopsychosocial model where active and adaptive type treatments are fundamental. There are various health professions that have competence in the treatment of TMD, however, although in the most complex cases should be treated simultaneously, still too many patients receive unique treatments and only from one point of view. This review exposes the treatments available from a clinical-scientific perspective and also emphasizes the importance of working in specialized units with those professionals who have competencies on the different conditions that may occur.

Adipose-derived stem cells and platelet-rich plasma for preventive treatment of bisphosphonate-related osteonecrosis of the jaw in a murine model.

OBJECTIVES: The main challenge in treating bisphosphonate-related osteonecrosis of the jaw (BRONJ) is the absence of an effective established treatment. We aimed to compare different potentially preventive treatments for BRONJ after dental extractions in zoledronic acid (ZA)-treated animals. We studied the local application of different combinations of adipose-derived stem cells (ASCs) with or without previous stimulation with bone morphogenetic protein 2 (BMP-2) and platelet-rich plasma (PRP) in rats. MATERIAL AND METHODS: Fifty-six male Wistar rats were treated with ZA for 9 weeks. Dental extractions were performed in the eighth week, and the animals were divided into 4 groups. In group 1 (n = 14), alveolar coverage with mucoperiosteal flap was performed. In group 2 (n = 14), PRP was applied over the sockets and covered with the flap. In group 3 (n = 15), allogeneic ASCs with PRP were applied and covered with the flap. In group 4 (n = 13), animals were treated with ASCs cultured with BMP-2, PRP, and flap coverage. Histologic, fluorescence, and radiologic studies of the maxillae were performed. RESULTS: ASC-treated animals showed lower frequency of osteonecrosis (14% vs 50%, p = 0.007) and greater bone turnover (p = 0.024) and osteoclast count (p = 0.045) than those not receiving the ASC treatment. CONCLUSIONS: In this high-risk model, ASC-based treatments seem to prevent BRONJ more effectively than mucosal flap with or without PRP. The combination of ASCs and PRP appears to be synergistic, and the addition of BMP-2 could further improve the results.

Zoledronic acid - related osteonecrosis of the jaws. Experimental model with dental extractions in rats.

INTRODUCTION: Bisphosphonate-related osteonecrosis of the jaws (BRONJ) is a pathologic condition of increasing frequency, with a poorly understood pathophysiology and which can be difficult to manage. The aim of this study was to find a reproducible experimental model that directly relates chronic bisphosphonate administration with the development of osteonecrosis with or without tooth extraction, with no other drug involved. MATERIAL AND METHODS: Twenty male Wistar rats were divided into 4 groups (n = 5/group). Animals were injected over 9 weeks with zoledronic acid (0.1 mg/kg). In groups 1 and 2 three times a week intraperitoneally, and in group 3 once a week intravenously. A control group (group 4) received intraperitoneal injections of saline solution three times a week. After 8 weeks of treatment, 3 right upper jaw molars were extracted in groups 1, 3 and 4 and all rats were sacrificed 1 week later. The maxillae were histologically analyzed for presence of osteonecrosis foci, number of osteoclasts, vascularity, bone resorption status and presence of abscess. Radiographic examination was performed with a plain radiograph of each hemi-head. RESULTS: We found that group 1 (dental extractions and highest cumulative dose of zoledronic acid) had the highest incidence of osteonecrosis (80%), absence of bone resorption (100%) and lowest number of osteoclasts (mean 7.9/field at 40×). Zoledronic acid-treated groups showed variable degrees of osteosclerosis and trabecular disorganization on X-ray study. CONCLUSIONS: We offer a new animal model of BRONJ after zoledronic acid administration and dental extractions, achieving bone changes similar or superior to previous studies, highlighting the dental extraction as an important trigger factor.

Local flap reconstruction of large scalp defects.

Scalp defects can have a number of origins, and their repair is dependent upon their location, size and depth. In the case of the scalp, the repair of even small defects is complicated. Local flaps are the reference for the reconstruction of such defects. Knowledge of scalp anatomy is essential for preparing these flaps, which must be based on one or two vascular pedicles to afford a large rotation angle--thereby facilitating closure of the defect. The parietal zone is the location offering the greatest flap mobilization possibilities. We present a case involving the repair of a major pericranial frontoparietal scalp defect. A local transverse posterior transpositioning scalp flap was raised with the posterior auricular and occipital arteries as vascular pedicle. Following repositioning of the flap, a free partial-thickness skin graft from the thigh was used to cover the donor zone. A review is provided of the different techniques for the reconstruction of large scalp defects.

Intraoral tumor with rapid growing. Report of a case.

The appearance of an intraoral mass is common in our specialty. Most are benign lesions, but some are primary malignancies. Metastases account for less than 1% of all oral malignancies. An 86 year old woman was referred to our department with a large, asymptomatic, intraoral, fast-growing mass. She had no previous cancer history or other relevant physical findings. The radiology studies showed underlying bone erosion. The histological study showed a metastatic adenocarcinoma with a suspected origin in the abdomen. We were unable to identify it by non invasive diagnostic procedures. Given the patient's general status and despite the ominous prognosis of such lesions, we decided not to perform any aggressive therapy beyond removing the oral mass, in order to maintain her quality of life. There have been no local recurrences until this time.

Chronic lingual ulceration caused by lipoma of the oral cavity. Case report.

Although lipomas are among the most frequent tumors in the human body, their presentation in the oral cavity is not common. Oral cavity lipomas usually show a slow painless and assymptomatic growing. When these tumors reach big sizes, they can cause compressive symptons and deformities. In this paper we present the case of a patient in whom oral lipoma was the final finding in the differential diagnosis of a chronic mucosal ulcer. CT scan and MRI images and microscopical examination after fine-needle aspiration were the clue for the final diagnosis. The surgical excision of the tumor was the basis for the healing of the ulcer. We also review the most relevant and recent literature about clinic, diagnosis and treatment for these tumors.